Infant Hall:
Microphones
- Slide the switch to the ON position, a green light will flash once to show the power status.
- You need to adjust the individual handheld MIC volumes (MIC INPUT 1 – 2)
- You can achieve this by checking the sticker on the handheld Microphone & referring to the number above the dial labelled 'Microphones'.
Example: MIC 1 is too quiet and needs to be louder – Find the Microphones section on the mixer, then Input 1 and adjust the volume knob until the desired volume is achieved.
Computer (Laptop)
- Open and power on the laptop.
- Log in as your domain account or use the visitor account details found above the rack on the wall.
- Ensure the audio output on Windows is set to ‘1 - AMD High Definition Audio’
- Before altering the volume on the mixer, please ensure the laptop is at 100% volume & then adjust the volume knob on the mixer (labelled Laptop) to the desired volume.
- The laptop is routed through the AUX INPUT (AUX 1) on the mixer.
Projector
- On / Off buttons can be found on the wall plate above the rack & are labelled.
- Raise & lower buttons can also be found here for the projector screen.
- By default, the projector is plugged into the laptop and will mirror the display.
- If there is no input showing on the projector, ensure the projector is on the HDMI input 1.
- Using the supplied controller to select input, please select HDMI 1.
- If there is still no display on the projector, please push Windows Key + P on the laptop keyboard. This will display a panel on the side of the screen, then click Duplicate.
CD / DVD Player
- Open and Power on the laptop.
- Log in as your domain account or use the visitor account details found above the rack on the wall.
- Please use VLC Player to playback DVD and audio content via the laptop - This can be found in the start menu.
- Ensure the audio output on Windows is set to ‘1 - AMD High Definition Audio’
- Before altering the volume on the mixer, please ensure the laptop is at 100% volume & then adjust the volume knob on the mixer (labelled laptop) to the desired volume.
- The laptop is routed through ‘AUX INPUT’ (AUX 1) on the mixer.
Bluetooth Audio
- To pair a new device, please follow the instructions below, Ensuring the mixer is powered on prior to step 1.
- Select Bluetooth settings on the device to be paired, then select ‘adastra_0000’ to pair to this device.
- Note: No passcode has been set.
- Once connected, you should now be able to play music through the AV system.
- To alter the volume, you can use either vol up or down on the paired device or the volume knob labelled 'MEDIA' on the mixer.
Mixer
- Here you will find all the input volumes for the Microphones, Desktop & Bluetooth audio.
- The volume knobs should be set at the 2 - 3 o’clock position for a reasonable level of audio without distortion.
- On the far right by the power switch, you will find the master volume knob & the power switch. This should be set to the same position to ensure a normal audio level.
Junior Hall:
Microphones
- Slide the switch to the ON position, a green light will flash once to show the power status.
- You need to adjust the individual handheld Microphone volumes (MIC INPUT 1 – 2)
- You can achieve this by checking the sticker on the handheld Microphone & referring to the number above the dial labelled 'Microphones'.
Example: MIC 1 is too quiet and needs to be louder – Find the Microphones section on the mixer, then Input 1 and adjust the volume knob until the desired volume is achieved.
Computer (Laptop)
- Open and power on the laptop.
- Log in as your domain account or use the visitor account details found above the rack on the wall.
- Ensure the audio output on Windows is set to ‘1 - AMD High Definition Audio ’
- Before altering the volume on the mixer, please ensure the laptop is at 100% volume & then adjust the volume knob on the mixer (labelled laptop) to the desired volume.
- The laptop is routed through ‘AUX INPUT’ (AUX 1) on the mixer.
Projector
- On / Off buttons can be found on the wall plate above the rack & are labelled.
- Raise & lower buttons can also be found here for the projector screen.
- By default, the projector is plugged into the laptop and will mirror the display.
- If there is no input showing on the projector, ensure the projector is on the HDMI input 1.
- Using the supplied controller to select input, please select HDMI 1.
- If there is still no display on the projector, please push Windows Key + P on the laptop keyboard. This will display a panel on the side of the screen, then click Duplicate.
CD / DVD Player
- Open and Power on the laptop.
- Log in as your domain account or use the visitor account details found above the rack on the wall.
- Please use VLC Player to playback DVD and audio content via the laptop - This can be found in the start menu.
- Ensure the audio output on Windows is set to ‘1 - AMD High Definition Audio ’
- Before altering the volume on the mixer, please ensure the laptop is at 100% volume & then adjust the volume knob on the mixer (labelled Laptop) to the desired volume.
- The laptop is routed through ‘AUX INPUT’ (AUX 1) on the mixer.
Bluetooth Audio
- To pair a new device, please follow the instructions below, Ensuring the mixer is powered on prior to step 1.
- Select Bluetooth settings on the device to be paired, then select ‘adastra_0000’ to pair to this device.
- Note: No passcode has been set.
- Once connected, you should now be able to play music through the AV system.
- To alter the volume, you can use either vol up or down on the paired device or the volume knob labelled 'MEDIA' on the mixer.
Mixer
- Here you will find all the input volumes for the Microphones, Computer & Bluetooth audio.
- The volume knobs should be set at the 2 - 3 o’clock position for a reasonable level of audio without distortion.
- On the far right by the power switch, you will find the master volume knob & the power switch. This should be set to the same position to ensure a normal audio level.
If you are still experiencing issues after reading this guide, then please contact Springwell IT Team;
- Via Email:
- helpdesk@springwellschool.net
- Via Portal:
- springwellschool.freshdesk.com
- Via Phone:
- 02380426878